|
When sight lines into an area need to be eliminated. This option is used in areas where privacy of the patrons is of utmost importance.
General Specifications for Powder Coated Finished Partitions
Doors, panels, screens and pilasters shall be construct of two sheets of tension leveled zinc coated steel galvanneal ASTM A653 GR33 formed and cemented under pressure to a structural 32psisound deadening honeycomb core with a waterproof thermal setting adhesive. Formed edges of doors, panels, and pilasters shall be welded at intervals around the entire perimeter to construct a rigid one-piece integral unit. Edges to be capped with a rolled form locking clip moulding. Corner to be welded and ground smooth for a clean appearance.
Panels: Shall be 1-inch (25mm) thick with covers sheets to be not less than 22ga. (0.8mm)
Hardware: All panel and pilaster brackets to be chrome plated Zymark die-castings. All software is ADA (Americans with Disabilities Act) and CSA (Canadian standards Association) approved.
Protective Finish: Al steel sheet to br phosphate cleaned and finished with a high-performance hybrid powder epoxy. The painting system is to be applied electrostatically and cured at 375 degrees for 10 minutes to achieve a uniform smooth protective finish. Thickness of coating shall be min. 1.5mm. Color shall be selected from Hovik's Color Selector Special anti-graffiti textures, patterns and custom colors are also available upon request.
Stainless Steel Finish: Construction specifications are to be the same as powder coat finish, except that sheet metal to be 304, #4 finish stainless steel unpainted with protective film removable upon completion of installation. *Textured finish stainless steel available with an up charge. Please, consult with factory for further information.
Installation: Floors shall be clean and dry prior to installation.
Handicapped Compliance
From powder coat baked enamel to plastic laminate to stainless steel or solid phenolic toilet partitions, Hovik has the product and design to fill all your needs. All washroom compartments are manufactured to meet the physically challenged code requirements.
In our effort to supply the highest quality washroom compartments, Hovik has placed special emphasis on commitment to the physically challenged, with our easy grasp door latch handle and pedestal mounted pilasters.
Privacy Screens/Partitions for Washrooms & Change Rooms by
| 
