HOVIK's - Locker Specifications
Materials
Lockers are constructed from cold rolled sheet steel free from surface imperfections and capable of receiving a high-grade hybrid epoxy polyester finish.
Doors
Doors are of double pan construction and consist of 20 gauge outer skin formed and welded to an inner skin of 22 gauges. They are assembled with a structural honey comb core bounded to both skins of metal then welded around the perimeter of inner skin to give a rigid door system. Doors are complete with a one way fit anodized aluminum recessed box with easy grip handle and an embossed area for a flush fit number plate.
Doors for superior strength are also offered in 16 GA material (outer skin only).
Door Frame Rails and Cross Braces
The door frame and vertical cross braces are constructed of no less than 16 gauge materials, and formed to allow door to fit with a flush finish top to bottom. Rails have full length door stops and punched holes for attaching shelves. Cross braces tops and bottoms are fabricated with a series of ventilating slots to allow airflow to the lockers.
Body Construction
Locker side, backs, tops, bottoms, and shelves are constructed for 24 gauge material and are formed from pre-painted galvanized steel in our 360 locker grey finish. The edges are formed to provide a strong rigid assembly when riveted together. Shelves have no sharp edge and a series of holes are punched for ventilation and hook attachment. All locker bodies, backs, and shelves are pre-painted galvanized steel in our light reflecting #360 locker grey.
Hinge-Continuous
A full length 18ga continuous piano hinge is securely welded to the frame and fastened to the door with screws or rivets. The hinge is fastened on the right side of the frame allowing doors to swing from left to right.
Locking Methods
A hasp and padlock, which fits into recessed aluminum pocket, creates maintenance free single point locking system. A hasp is permanently welded to the frame and constructed from 10 gauge formed material. Out hidden nylon friction doorstop ensures proper door closure and quiet operation. The doors are also equipped with door mutes to add to quiet operation.
Protective Finish
All steel sheets are phosphate cleaned and finished with a high performance hybrid powder epoxy. The paint is applied electrostatically and cured at 375 for 15 minutes to achieve a uniform smooth protective finish. The thickness of the coating is a minimum of 1.5 mm., and the Color is selected from Hovik's Color Selector, and Special anti-Graffiti textures, patterns and custom colors are also available upon request.
Please Note: Standard color is #650 Black for our frames and #360 locker grey for our locker bodies, backs and shelves. Customers can select, at no extra charge, 20 standard colors for their door selection.
Guarantee
All Hovik products are guaranteed to be free from defects in material and workmanship for two years from date of purchase. Any products returned to Hovik under this guarantee will be repaired or replaced at no charge. Damage to the product due to vandalism is not included in this guarantee.
Disclaimer
Product and specifications are subject to change without notice. In the interest of safety, all Hovik lockers must be securely anchored to the floor and/or wall.
Company
Hovik Manufacturing Inc.
45225 Keith Wilson Road
Chilliwack, B.C.
V2R 5S1
Phone: 604-858-2760
Fax: 604-858-2761
|
